FA316LT1-1-Stainless Steel Flux-cored Wire
FA316LT1-1 | GB/T17853 | E316LT1-1 |
AWS A5.22 | E316LT1-1 | |
JIS Z3323 | TS316L-FC1 | |
EN ISO 17633-B | TS 316L-F C1 1 |
Characteristics: FA316LT1-1 is an ultra-low-carbon austenitic stainless steel flux-cored wire with a nominal component 18.5% Cr-12.5% Ni-2.5% Mo, the protection gas is 100% CO2. The weld metal contains a certain amount of Mo, and the anti-corrosion performance of the acetic acid, the sulfurous acid, the phosphoric acid and the salt is good; the weld metal is suitable for all-position welding, the welding process performance is excellent, the arc is stable, the splash is less, and the welding seam is beautiful in shape.
Application: It is applicable to the welding of petrochemical equipment, ocean engineering equipment and the like, such as 022Cr17Ni12Mo2 (SUS 316L) and so on.
Chemical Composition of Deposited Metal
Elements wt% | C | Cr | Ni | Mo | Mn | Si | Cu*1 | S | P |
Standard Value | 0.04 | 17.0-20.0 | 11.0-14.0 | 2.0-3.0 | 0.5-2.5 | 1.0 | 0.05 | 0.03 | 0.04 |
| Type Value | 0.02 | 19.0 | 11.93 | 2.5 | 1.25 | 0.52 | 0.12 | 0.02 | 0.02 |
Mechanical Properties of Deposited Metal
Test Items | Test Temperature ℃ | Tensile Strength MPa | Yield Strength MPa | Elongation % |
Standard | Room Temperature | ≥485 | -- | ≥30 |
As Weld | Room Temperature | 584 | -- | 41 |
Note2：JISZ3323Standard:≥35%,AWS A5.22 Standard：≥30%，GB/T17853 and EN ISO17633Standard:≥25%。 | ||||
Shield Gas | Polarity & Welding Positions | |||
100%CO2 |
| |||
Welding Parameters Recommended
Diameter mm | Current A | Voltage V | Stick Out mm | Welding Speed cm/min | Gas Flow Rate L/min |
0.9 | 50-160 | 23-31 | 15-20 | 20-80 | 15-25 |
1.2 | 160-220 | 26-31 | 15-20 | 20-60 | |
1.6 | 200-300 | 26-33 | 15-20 | 20-60 |
Size and Packing
Size | S200 | S300 | BS300 | Drum100 |
0.9mm | 5kg | 12.5kg | 12.5kg | 150kg |
1.2mm | 5kg | 12.5kg | 12.5kg | 150kg |
1.6mm | -- | 12.5kg | 12.5kg | 150kg |
