FA308LT1-1 is an ultra-low carbon austenitic stainless steel flux-cored wire with a nominal component 19.5% Cr -10% Ni. The protective gas is 100% CO2. It is suitable for all-position welding with excellent technological performance, stable arc, less splashing and beautiful weld form. the weld metal has good intergranular corrosion resistance and low crack sensitivity.
Characteristics: FA309LMoT1-1 belongs to ultra-low carbon 24% Cr-13% Ni-2% Mo of stainless steel flux-cored wire, use with gas shield of CO2. Low carbon content reduces the possibility of intergranular corrosion and increases the content of ferrite. When used in welding the first layer surfacing of carbon steel or low alloy steel or dissimilar steel, the tendency of solidification crack is reduced.
Characteristics:FA310T0-1/4 belongs to Austenite stainless steel flux-cored wire with nominal component 26.5%Cr-21%Ni. Because the weld metal is full Austenite structure, it is sensitive to hot crack tendency. The welding wire adopts special alkaline slag system and has strong crack resistance. The weld metal has excellent oxidation resistance at 900 ℃ ~ 1100 ℃, and has excellent corrosion resistance and mechanical properties.
Characteristics: FA316LT1-1 is an ultra-low-carbon austenitic stainless steel flux-cored wire with a nominal component 18.5% Cr-12.5% Ni-2.5% Mo, the protection gas is 100% CO2. The weld metal contains a certain amount of Mo, and the anti-corrosion performance of the acetic acid, the sulfurous acid, the phosphoric acid and the salt is good; the weld metal is suitable for all-position welding, the welding process performance is excellent, the arc is stable, the splash is less, and the welding seam is beautiful in shape.
Characteristics: FA347T1-1 belongs to stainless steel flux-cored wire with nominal component 19.5%Cr-10%Ni , contains stabilization element Nb (or Nb+Ta)). The protective gas is 100% CO2. It is possible to reduce the precipitation of intergranular chromium carbide by stabilizing elements, so as to improve the resistance to intergranular corrosion.
Characteristics: he main composition is 13Cr-NiMo, which is martensite stainless steel. It can be used to weld 13%Cr-Ni stainless steel. Because the deposited metal is a high strength martensite structure, it needs to be fully preheated at about 100 ℃.
Characteristics:CWL E711 belongs to carbon steel flux-cored wire for CO2 gas shielded welding, and the cross section of welding wire is "O" type docking form, suitable for all position welding, Especially when welding upward, the weld is fine and beautiful, horizontal fillet weld appearance is plane or slightly convex.
The low-carbon steel flux-cored wire of COREWEL is a CO2 gas shielded flux-cored wire, which is excellent in welding performance: stable in electric arc, less in splash, easy to remove slag, beautiful in welding seam, can be welded in full position, and can also be vertically welded down. It can be used to weld in steel structures, such as ships, machinery manufacturing, petrochemical industry, bridges, etc.
CWL50N-6 is environmental protection solid wire with Tensile strength 490Mpa , this welding wire surface is treated by special process, save copper plated process, reduce environmental pollution; The welder is free from the damage of copper smoke during welding, and better protects the health of users.
Characteristics: CWL50N-6 is environmental protection solid wire with Tensile strength 490Mpa , this welding wire surface is treated by special process, save copper plated process, reduce environmental pollution; The welder is free from the damage of copper smoke and better protects the health of users. The arc is stable, the shape is beautiful, the molten iron flow is good, the welding technology is good.